Automated SB970CR Scimitar Bollard

Designed to withstand direct impact forces in excess of 1,800 KJ

The SB970CR Scimitar Security Bollard provides a high level of security against unauthorised vehicle access without the need for an outwardly aggressive appearance.

The PAS 68 impact tested bollard is an active bollard that is hydraulically operated, it stands 1000mm in its fully raised position and retracts to road level to allow authorised vehicles access. It can be integrated with our other PAS 68 static bollards to create a cohesive protective perimeter around an area or building.

The active bollards are developed as a Hostile Vehicle Mitigation (HVM) product and are designed to withstand direct impact forces in excess of 1,800 KJ, the bollard provides protection from extreme Vehicle Borne Improvised Explosive Device (VBIED) attack to sites where aesthetics and public perception are a consideration.

The SB970CR Scimitar Security Bollard provides a high level of security against unauthorised vehicle access without the need for an outwardly aggressive appearance.

The PAS 68 impact tested bollard is an active bollard that is hydraulically operated, it stands 1000mm in its fully raised position and retracts to road level to allow authorised vehicles access. It can be integrated with our other PAS 68 static bollards to create a cohesive protective perimeter around an area or building.

The active bollards are developed as a Hostile Vehicle Mitigation (HVM) product and are designed to withstand direct impact forces in excess of 1,800 KJ, the bollard provides protection from extreme Vehicle Borne Improvised Explosive Device (VBIED) attack to sites where aesthetics and public perception are a consideration.

Automated SB970CR Scimitar Bollard

Key Features

  • Dot Physically impact tested to PAS68 criteria
  • Dot Unobtrusive appearance
  • Dot Minimal foundation requirement (2.25 cubic metres)
  • Dot Programmable logic control system
  • Dot Comprehensive attack resistance and confidence in individual bollard performance
  • Dot Aesthetically acceptable
  • Dot Ease of installation
  • Dot Flexibility to interface with all forms of access control

Options Available

Each bollard system comes with a push-button control as standard. However, it can be customised to interface with a wide range of access control equipment to suit specific customer requirements.

Available configurations include (but are not limited to) inductive loop systems card readers, communication equipment and manned guard emergency systems can be accommodated.

For safety reasons pedestrians, cyclists and motorcycles are advised not to use a bollard controlled roadway, additional safety measures can be incorporated into the bollard system if required.

  • Multiple testing (single bollard / multiple bollards)
  • Unobtrusive appearance
  • Minimal foundation requirement (2.88 cubic metres)
  • Physically impact tested to PAS 68 criteria
  • Manufactured from heavy gauge materials
  • Manual hand pump facility
  • Programmable logic control system
  • 100% duty cycling
  • Comprehensive understanding of attack resistance and confidence in individual bollard performance
  • Aesthetically acceptable
  • Ease of installation
  • Confidence in proven performance
  • Strength and durability
  • Operational under power failure conditions
  • Flexibility to interface with all forms of access control
  • Reliable and dependable

Physical Dimensions:
HPU Cabinet – 640/940mm W x 670mm D x 1300mm H
Single Bollard – 610mm W x 610mm D x 2000mm H

Basic Power Requirements:
3-Phase 415V AC, 50Hz, 20 Amps (other voltages are available)

Control Voltage:
S.E.L.V 24v

Performance:
Loading 30 Tonnes

Impact Absorption:
Single SB970CR -1852KJ (fully operational immediately after impact)
Dual SB970CR – 1852KJ (fully operational immediately after impact)

Full PAS68 Classification:
V/7500(N2)/80/90:0/25

Speed of Operation:
6 Seconds to raise or lower

Tested Model:
990mmHx322mm dia 25mm wall thickness

Operating temperature range available:
-25°C – +70°C

Construction:
The unit is comprised of a static subsurface mounting tube and impact tube. The supporting framework is constructed from fully welded, high strength, structural steel completely encased with
steel sheets to provide a self-shuttered module. The 323.9mm (+/- 1%) diameter bollard is constructed using hi-tensile
structural steel.

  • Traffic lights and back-indication systems
  • Emergency buttons with lock down
  • Inductive loop systems
  • Access and intercom systems
  • Interlocking systems to give air-lock type protection on sites for higher threat levels
  • Decorative sleeves (fibre glass / stainless steel)
  • UPS backup for the electrical system
  • LPS 1175 cabinets available for HPU
  • Multiple testing (single bollard / multiple bollards)
  • Unobtrusive appearance
  • Minimal foundation requirement (2.88 cubic metres)
  • Physically impact tested to PAS 68 criteria
  • Manufactured from heavy gauge materials
  • Manual hand pump facility
  • Programmable logic control system
  • 100% duty cycling
  • Comprehensive understanding of attack resistance and confidence in individual bollard performance
  • Aesthetically acceptable
  • Ease of installation
  • Confidence in proven performance
  • Strength and durability
  • Operational under power failure conditions
  • Flexibility to interface with all forms of access control
  • Reliable and dependable

Physical Dimensions:
HPU Cabinet – 640/940mm W x 670mm D x 1300mm H
Single Bollard – 610mm W x 610mm D x 2000mm H

Basic Power Requirements:
3-Phase 415V AC, 50Hz, 20 Amps (other voltages are available)

Control Voltage:
S.E.L.V 24v

Performance:
Loading 30 Tonnes

Impact Absorption:
Single SB970CR -1852KJ (fully operational immediately after impact)
Dual SB970CR – 1852KJ (fully operational immediately after impact)

Full PAS68 Classification:
V/7500(N2)/80/90:0/25

Speed of Operation:
6 Seconds to raise or lower

Tested Model:
990mmHx322mm dia 25mm wall thickness

Operating temperature range available:
-25°C – +70°C

Construction:
The unit is comprised of a static subsurface mounting tube and impact tube. The supporting framework is constructed from fully welded, high strength, structural steel completely encased with
steel sheets to provide a self-shuttered module. The 323.9mm (+/- 1%) diameter bollard is constructed using hi-tensile
structural steel.

  • Traffic lights and back-indication systems
  • Emergency buttons with lock down
  • Inductive loop systems
  • Access and intercom systems
  • Interlocking systems to give air-lock type protection on sites for higher threat levels
  • Decorative sleeves (fibre glass / stainless steel)
  • UPS backup for the electrical system
  • LPS 1175 cabinets available for HPU

Some of our clients

Microsoft Logo
Hilton Zurich Airport Logo
Kemba Credit Union Logo
Hanover Bank Logo
Spisestuerne Logo
Bouwmaat Logo